The lightly textured and microperforated surface of Dune acoustic ceiling tiles / panels combines good sound absorption and sound attenuation performance. Available in a range of sizes and edge profiles offering outstanding value.
Armstrong mineral fibre ceilings are INTERIOR FINISHES ONLY and conditions during the installation should reflect this. Panels cannot be used in exterior applications, where standing water is present, or where moisture will come in direct contact with the panels.
Armstrong recommend during installation that the relative humidity (RH %) should not exceed 99%, within a 0–49°C temperature range (with the exception of Bioguard Acoustic OP RH100 panels, which can be installed in conditions of 100% RH, including “standing water” applications, within 0–49°C).
Cartons should be opened carefully to ensure that tiles can be removed without damaging the edges of the tiles. It is recommended that tiles are cut with a sharp knife. Unnecessary breakage of tiles should be avoided. Care is necessary when handling and installing tiles, to prevent Installation & Maintenance Instructions 2 finger marking of the surface from soiled or greasy hands, and where appropriate, clean cotton gloves should be worn. Installation of ceiling tiles should only take place after the completion of any work generating large amounts of dust.
The ceiling installer is responsible for the satisfactory installation of the ceiling and adherence to industry best practice and in accordance with AS/NZS2785:2020
Note: The acoustical panels shall not support any other material as this may effect dimensional stability
| Edge Detail | Board Tegular 24 & Beveled Tegular 15 |
|---|---|
| Material | Wet formed mineral fibre. Factory applied acrylic paint. |
| Size | 600 x 600 x 16 mm |
Get in Touch
We usually respond within 24 hours.
"*" indicates required fields
© Plaster Wholesalers. All Rights Reserved 2024.
Website by Loop Web Design
